Aeration systems achieve the highest reduction of methane, radon and sulphur: up to 99% versus 50-80% with granular activated carbon.
New technology solves the problem of radon in well water before the water enters your home. Airwell sustains a “down the well” process indefinitely without debilitating scaling and bio-fouling.
A pipe with an aeration section is inserted from top to bottom in the well through the addition of riser pipes. A low voltage compressor delivers air to the active section of the Airwell pipe.
This creates a hydrodynamic pressure, causing water from the base of the well to rise through the pipe and be aerated through the active section.
The result: injected air will have stripped previously trapped gasses out of the water in the relatively pressurized conditions at the top of the well.
Air access is restored to the water enabling the ventilation of gases, such as radon, methane and sulphur to the atmosphere. The system quickly and reliably removes contaminants.
Key Features:
automatic, runs 24/7
low voltage, consumes energy of a 90W bulb
maintenance free
minimal operating cost
no scaling or bio-fouling
no chemicals
On-site in PEI with Radon Repair for Airwell™ training.
Airwell - Radon, Methane and Sulphur removed outside.
Airwell Case Studies
The Airwell aeration system is mitigating radon in well water across North America. Learn about the stories. View the certified and independent lab results. Visit Airwell Case Studies.
Airwell is a Holmes Approved Product
